|
|
« Item Item »
SURLY PUGSLEY FRAMESET
(Large image)
Surly Pugsley Mountain Frame The premise behind Pugsley’s design is based on the allowance of tires with a larger-than-average footprint. It was created to go where other bikes may flounder. The fork will accept 4" tires on 26" rims. The floatation and traction gained by using large-volume, low-pressure tires (we highly recommend the Surly Endomorph 3.7 tires) can get you over and through otherwise-unrideable terrain: ice, snow, sand, mud, wet rocks and roots. In many conditions, bigger is better. Who should ride Pugsley? Beach/desert riders, snow/ice riders, wilderness explorers, and anybody else in need of a bike that will provide extra stability, traction, and floatation when the terrain gets loose and unpredictable. If you fall into any one of those categories, you should ride a Pugsley. -
The Surly Pugsley Mountain Frame is a Sport Utility Bicycle that goes where other bikes dare not tread. -
Accepts massive Large Marge rims and 26x4.0 tires (RI407A01 ) -
Will run linear pull brakes if used with Large Marge rims -
Accommodates 4"-wide tires on 26" rims. Designed to provide increased stability, floatation, and traction on varied terrain. -
TIG-welded double-butted Surly 4130 CroMoly frame with rear-loading horizontal dropouts and derailleur hanger. International standard disc tab and removable cantilever pivots, spaced 120mm apart, foruse with Surly Large Marge rims. -
Includes straight-blade tapered suspension-corrected (447mm axle to crown) 4130 CroMoly fork. Spaced 135mm at the dropouts to accept a rear hub. -
Features 120mm-spaced removable canti pivots, rear international standard disc tab, 1-1/8" threadless steerer, and single dropout eyelets. - Frame and fork dropouts are spaced at 135mm and offset 17.5mm, to the drive side, to compliment a wider chainline created by the use of a 100mm bottom bracket shell. Equal spacing and offset, of the fork and frame, allow front and rear wheels to interchange.
- Braze-ons: Eyelets for fenders, upper and lower rear rack mounts, top-tube and seatstay guides for use with continuous shifter and brake housing, dual water bottle bosses
- Component specs: 27.2mm seatpost, 30.0mm Constrictor seatpost clamp (included), 100mm bottom bracket shell, top-pull E-type front derailleur, 135mm hub, 22-32-44t chainring clearance, 1-/8" threadless headset
- 135mm hub spacing front and rear
- Includes adapter for building offset wheels
- Uses rear disc caliper adapters front and rear
- Wheels need to be built with 17.5mm offset (reverse dished)
- Specially drilled Large Marge rims specifically recommended for Pugsleys (offset requires offset drilling of spoke holes) *Adapter tool for building offset wheels comes with each Pugsley frame.
- Front Derailleur Clamp: E-Type
- Front Derailleur Cable Pull: Top
- Front Derailleur Style: Topswing
- Fork Rake: 100mm
- Brake Type: Linear Pull - Disc
- Wheel Size: 26"
- Headset Type: 1-1/8" Standard Cups
- BB Shell Width: 100mm
- Disc Mount Type: 51mm I.S. Rear
- Front Hub Spacing: 135 mm
- Rear Hub Spacing: 135mm
- Material: 4130 CroMoly
- Steerer Tube: 1-1/8" Threadless
- BB Thread Type: English
- Seatpost: 27.2 mm
-
Note use the special Large Marge rims to give you more disc-side dish and more even spoke tension. Use these special, asymmetrically-drilled (6mm offset) Large Marge rims on the Pugsley. Non-Surly rims, intended for use in Pugsley wheelsets, should be drilled 6-12mm offset to the drive side. MEASUREMENTS / Measurements Key
| | | 16 in. | 18 in. | 20 in. | 22 in. | | | | | | | ST (C-T)
Inches
mm
|
16.0
406.4
|
18.0
457.2
|
20.0
508.0
|
22.0
558.8
| | | | | | TT (C-C)
Inches
mm
|
21.8
552.5
|
22.4
569.5
|
23.1
587.3
|
24.0
608.6
| | | | | | TT (Effec.)
Inches
mm
|
22.9
580.9
|
23.5
595.7
|
24.0
610.1
|
24.6
625.0
| | | | | | HT Angle
degrees | 70.5° | 70.5° | 70.5° | 70.5° | | | | | | ST Angle
degrees | 72.0° | 72.0° | 72.0° | 72.0° | | | | | | BB Drop
Inches
mm |
2.2
55.0
|
2.2
55.0
|
2.2
55.0
|
2.2
55.0
| | | | | | CS Length
Inches
mm |
17.6
448.1
|
17.6
448.1
|
17.6
448.1
|
17.6
448.1
| | | | | | Wheel Base
Inches
mm |
42.0
1067.3
|
42.6
1082.3
|
43.2
1097.3
|
43.8
1112.6
| | | | | | S.O. Height*
Inches
mm |
30.8
782.2
|
32.0
811.6
|
33.3
845.8
|
34.5
875.8
| | | | | | HT Length
Inches
mm |
4.0
102.0
|
4.3
110.0
|
5.1
130.0
|
5.9
150.0
| | | | | | FK Length
Inches
mm | 17.6
447.0 | 17.6
447.0 | 17.6
447.0 | 17.6
447.0 | | | | | | FK Rake
Inches
mm | 1.7
43.0 | 1.7
43.0 | 1.7
43.0 | 1.7
43.0 | | | | | | Weight
lbs. | 5.56 | 5.66 | 5.88 | 6.1 | | | | | | *Standover height measured using Surly Endomorph 3.7" tire measuring 740mm in diameter.
|
|
|